oil / water / solids separators

OIL/WATER/SOLIDS SEPARATORS

Designed for highly contaminated trade waste and wash down wastewater treatment to remove oil and suspended solids from water
Independently tested to achieve less than 5 mg/L hydrocarbons in treated water from a heavily contaminated raw water containing 5000mg/L hydrocarbons
Sydney Water approved
Water Services Association of Australia (WSAA) appraised*
A choice of annealed stainless steel (304) or marine grade stainless steel (316) for greater durability, strength, corrosion resistance and appearance
Superior Vertical Tube Coalescing (VTC) technology facilitates better flow, serviceability and durability
Treatment capacity ranges from 720L/h to >250,000L/h
Above ground installation means easy install, maintenance, or relocation if required
Pumped system design ensures the correct flow rate for reliable treatment
Spare parts are readily available and can be delivered overnight to most locations
A choice of helical rotor or diaphragm pumps are available
Options are available for Ex’E’ and EX’D’ zoned areas

* Download WSAA Independent Product Appraisal

WHAT ARE THEY USED FOR?

Separators or in ground interceptors are excellent and affordable for primary treatment, to remove free floating hydrocarbons (such as diesel, hydraulic fluid and oil) and larger suspended solids from wastewater. This form of treatment is required prior to trade waste (sewer) discharge. However it's important to note they do not provide the secondary or tertiary treatment that is required for reliable compliant environmental discharge or safe reuse. No separator or interceptor can be relied on to treat industrial wastewater to a standard suitable for compliant environmental discharge, recycling or reuse, for the following reasons:

They do not adjust the pH of the water
They do not remove heavy metals (including dissolved metals)
They do not remove light suspended solids (e.g. coal fines, and clay particles)
Under normal operating conditions (e.g. when detergents or surfactants are present), they do not remove emulsified hydrocarbons to a suitable level
They do not provide disinfection required in reuse applications where there may be human contact (including dust suppression applications)

For more information on whether a separator is the right choice for your water treatment needs, contact Clearmake.

PRODUCT SPECIFICATIONS

Model	LengthxWidthxHeight (mm)	Separator Tank Rated To (L/h)	Recomm. Pump Flow Rate (L/h)*	Recommended Holding Tank Size.(Litres)#
CB 1.0SS	1250 x 345 x 1290	1000	720	1500 - 2500
CL 1.5SS	1200 x 440 x 1290	1500	720	1500 - 2500
CL 3.0SS	1930 x 400 x 1350	3000	1500	3000 - 5000
CL 5.0SS	2260 x 600 x 1525	5000	4500	9000 - 15000
CL 6.0SS	2260 x 600 x 1525	6000	5400	12000 - 20000
CL 10.0SS	2500 x 1200 x 1525	10000	8500	18000 - 30000
CL 15.0SS	3100 x 1200 x 1525	15000	12000	24000 - 40000
CL 20.0 SS	3100 x 1600 x 1525	20000	15000	30000 - 50000
>CL 20.0SS	custom solutions designed to suit site requirements

* System performance may vary as a result of water quality and usage. When used in conjunction with quality quick break chemicals, such as Clearmake's Quick Break range of products, you'll benefit from optimal performance.

# Holding tank requirements will vary depending on site specific water quality. To ensure you select the most appropriately sized holding tank for your project, please contact Clearmake.